Black OBD2 KW818 Automotive Diagnostic Scanner Tool Auto Engine Analyzer For 12V Cars
The Kw818 NEW On-Board Diagnostic 2 / EOBD / CAN Auto Diagnostic Scanner supports all 10 On-Board Diagnostic II test modes on all compliant vehicles for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, TFT color display and built-in speaker, Real Time Battery Voltage Monitoring, the KW818 is truly the ultimate in power and affordability, allowing users to do their jobs faster.
All 12V gasoline and diesel cars
Support Free upgrade system and print data on PC
Displays monitor and I/M readiness status (emission status)
black white screen
SMT32F103C8T6 Chip solution
Read and erase fault code from engine
support detect 12V battery voltage
Works on all 1996 and later OBDII compliant US, European and Asian vehicles.
Easily determines the cause of the Check Engine Light ( MIL).
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes.
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Displays DTC definitions on unit screen, views freeze frame data.
Displays monitor and I/M readiness status (emissions).
Identifies pending codes, Reads live PCM datastream.
Displays live O2 sensor test data, Graphs data C (1996 and newer).
Reads, stores & playbacks live sensor data, Performs modules present test.
Memory/battery backup for off-vehicle data review and analysis.
Retrieves vehicle information (VIN, CIN and CVN), Supports CAN (Controller Area Network) and all other current
KW818 specification 1.Display: 2.8" (320*240dpi) color screen
2.Operating Temperature: 0 to 60 ℃ (32 to 140 ℉)
3.Storage Temperature: -20 to 70 ℃ (-4 to 158 ℉)
4.Power: 8 to 18 V provided via vehicle
5.Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area *Network ISO 11898)
6.Dimensions: 199mm (7.83in) x 104.5mm (4.11'') x 37.5mm (1.48'')
KW818 Supports Free Update 1. Load the CD and install the 'KONNWEI' Program on your computer.
Notice: Please turn off anti-virus software when installing, otherwise it will not be able to install the driver properly.
2. Connect the KW818 Scanner to PC, Meanwhile press any button of KW818, you will see below pictures shows
3. Download Latest patch or contact us for latest software , and select the fls file to update the DTC library; Select the ROM file to update the program inside the scanner.
4. Wait for the update process finished, the scanner KW818 will be ready to go! we will update to latest version before shipping out, normally there is no need to update for a long while.
Support Languages : English, Spanish, French, Russian,German, Dutch.